Detailed towing capacity for the 2020 Ford F-150 by trim, engine, drivetrain, payload, and tow package requirement.
Highest listed 2020 configuration
Configurations covered
2.7L EcoBoost, 3.5L EcoBoost, 3.5L V6, 5.0L V8
The 2020 Ford F-150 is a truck with towing capacity that varies by model year, trim, engine, drivetrain, axle ratio, payload, and factory towing equipment. Towlytics lists the Ford F-150 with a maximum towing capacity of up to 12,200 lbs when properly equipped.
The Ford F-150 towing package typically adds or enables the hardware needed for higher tow ratings, such as a hitch receiver, trailer wiring, cooling upgrades, brake controller availability, tow/haul calibration, and trim-specific trailering technology.
The Ford F-150 is best suited for larger travel trailers, enclosed trailers, boats, utility trailers, and heavier recreational towing setups when properly equipped. Always confirm the exact rating on the vehicle certification label, owner's manual, and manufacturer towing guide before towing.
Towlytics lists the 2020 Ford F-150 with a maximum towing capacity of up to 12,200 lbs when properly equipped. Actual capacity depends on the specific year, trim, engine, drivetrain, payload, and towing package.
Some Ford F-150 configurations may require a factory towing package or specific equipment to reach the highest tow rating. Check the exact year and trim because hitch, wiring, cooling, axle ratio, and brake-controller availability can change by configuration.
The 2020 Ford F-150 may be able to tow a camper depending on the camper's loaded weight, tongue weight, passengers, cargo, and the vehicle's payload rating. Compare the loaded trailer weight against the exact tow rating and keep tongue weight within payload limits.
This truck profile can tow a wide range of trailers, but the correct setup changes by cab, drivetrain, axle ratio, payload, and tow package. Focus on receiver rating, 7-pin wiring, and trailer-brake readiness. For the 2020 Ford F-150, start with fitment-specific parts and confirm all ratings against the owner’s manual, door-jamb payload label, hitch label, and trailer manufacturer specs.
Factory Class IV receiver or a vehicle-specific Class IV/V receiver matched to the truck's rating.
7-pin wiring should be the default for campers, enclosed trailers, and trailers with brakes; 4-pin adapter for small trailers.
Heavy-duty adjustable ball mount; consider multiple ball sizes if using different trailers.
Recommended for any trailer with electric brakes; many trucks support an integrated or plug-in brake controller.
Weight distribution and sway control are useful for campers, tall enclosed trailers, and longer highway trips.
Extended tow mirrors, bed/tailgate clearance checks, trailer camera prep, and weight-rated safety chains.
Utility trailers, boats, campers, enclosed trailers, atvs, motorcycles, and light equipment trailers are the most logical starting points. The final answer depends on loaded trailer weight, tongue weight, passenger weight, cargo, drivetrain, tow package, and whether the trailer has brakes.
| Year | Trim | Engine | Drivetrain | Max Towing | Payload | Tow Package | GCWR | Generation |
|---|---|---|---|---|---|---|---|---|
| 2020 | Lariat | 3.5L EcoBoost | 4x4 | 12,200 lbs | 3,000 lbs | Yes | 17,100 lbs | 13th Gen |
| 2020 | Lariat | 5.0L V8 | 4x4 | 11,000 lbs | 2,800 lbs | Yes | 16,500 lbs | 13th Gen |
| 2020 | XL | 3.5L V6 | 4x2 | 7,600 lbs | 1,910 lbs | No | 12,200 lbs | 13th Gen |
| 2020 | XLT | 2.7L EcoBoost | 4x4 | 8,500 lbs | 2,200 lbs | Yes | 14,500 lbs | 13th Gen |